¡Oferta!

Suspension kit Lift 4,5″ TeraFlex – Jeep Wrangler JL 4 Doors

El precio original era: €1.138,00.El precio actual es: €925,54. +IVA

FOX Racing
TeraFlex

The TeraFlex JL 4dr: 4.5” Coil Spring Base Lift Kit includes just the basic lift components only and doesn’t have the drivability of a full suspension system. Requires front control arm Sport Brackets, or adjustable control arms, and/or adjustable front track bar to correct suspension geometry.Does NOT include shocks. We recommend Falcon Performance SP2 Mode Adjust Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. 4.5” Coil Spring Base Lift Kits are offered without shock absorbers. Falcon Performance Shocks are available separately. Fits:Jeep Wrangerl JL 4 Doors Specs:Lift Height 4,5″Longer coils corrects the factory nose-down rakeLifts the vehicle Max Tire Diameter:Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops)Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) Aftermarket High Fenders: 39”+ (varies) Includes:Front 4.5” lift coil springsFront track bar bracket (TX1953500)Rear 4.5” lift coil springsRear Track Bar Bracket (TX1953600) 2” front & rear bump stop strike pad kit (TX1959500)0.5” front & rear bump stop strike pad shim kit (TX1959300)Front sway bar links (10,75”) – pairLonger rear sway bar links (11,5”) – pairAll necessary hardware Note: Caster correction required – NOT INCLUDED. Proper suspension geometry ensures all stability controls function w/in factory parametersModels with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tiresRequires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED Sport/Sahara Fenders require 3.5” front and 4” rear bump extension and shims in order to fit 37” tires. Requires an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit (TX1959300) – NOT INCLUDED Requires Shock Extensions or longer shocks, we recommending FOX ShocksAftermarket High Fenders required to fit 39”+ tires. Bump stop extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders. Installer must check for clearances. We recommend an additional 0.5” Bump Stop Strike Pad Shim Kit (TX1959300) – NOT INCLUDED 

Sin existencias

Descripción

The TeraFlex JL 4dr: 4.5” Coil Spring Base Lift Kit includes just the basic lift components only and doesn’t have the drivability of a full suspension system. Requires front control arm Sport Brackets, or adjustable control arms, and/or adjustable front track bar to correct suspension geometry.

Does NOT include shocks. We recommend Falcon Performance SP2 Mode Adjust Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. 4.5” Coil Spring Base Lift Kits are offered without shock absorbers. Falcon Performance Shocks are available separately.

 

Fits:

  • Jeep Wrangerl JL 4 Doors

 

Specs:

  • Lift Height 4,5″
  • Longer coils corrects the factory nose-down rake
  • Lifts the vehicle

 

Max Tire Diameter:

  • Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
  • Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops)
  • Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)
  • Aftermarket High Fenders: 39”+ (varies)

 

Includes:

  • Front 4.5” lift coil springs
  • Front track bar bracket (TX1953500)
  • Rear 4.5” lift coil springs
  • Rear Track Bar Bracket (TX1953600)
  • 2” front & rear bump stop strike pad kit (TX1959500)
  • 0.5” front & rear bump stop strike pad shim kit (TX1959300)
  • Front sway bar links (10,75”) – pair
  • Longer rear sway bar links (11,5”) – pair
  • All necessary hardware

 

Note:

  • Caster correction required – NOT INCLUDED. Proper suspension geometry ensures all stability controls function w/in factory parameters
  • Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires
  • Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED
  • Sport/Sahara Fenders require 3.5” front and 4” rear bump extension and shims in order to fit 37” tires. Requires an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit (TX1959300) – NOT INCLUDED
  • Requires Shock Extensions or longer shocks, we recommending FOX Shocks
  • Aftermarket High Fenders required to fit 39”+ tires. Bump stop extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders. Installer must check for clearances. We recommend an additional 0.5” Bump Stop Strike Pad Shim Kit (TX1959300) – NOT INCLUDED

 

Información adicional

Peso 30 kg